SABA SANITARY PRESSURE TRANSMITTER-MADE IN ITALY

SABA s.a.s

Builder Since 1969

These series of instruments has been designed for pressure transmission.

Pressure transmitters detect the pressure of liquid and gaseous fluids by transforming the value into an electrical signal. The sensor used is piezoresistive, consisting of a Wheatstone bridge whose resistances are diffused on a silicon chip.

Pressure transmitter with ceramic sensor and calibrated, compensated and amplified signal. They are supplied with current output.

TECHNICAL FEATURES:

Measuring range: 1-1.6 - 2.5 - 4 - 6 - 10 - 16 - 20 - 25 - 40 - 60 - 100 bar.

Connection: 1/2 "gas threaded connection or AISI 316 stainless steel diaphragm sanitary separator, DN-SMS-CLAMP-FLANGE

Power supply: 11 - 34VDC.

Output: 4 - 20 mA - 0.5V.

Temperature: 0 - 80 ° C. For higher temperatures, separate electronics.

Housing: AISI 304 stainless steel

Parts in contact with the fluid: AISI 316 stainless steel

Overpressure: 2 times the measuring range ???

Degree of protection: IP 65

Response time: <4 ms (settling); 150 ms (power on)

Measurement sensor: piezoresistive for fields ≤ 1.6 bar; ceramic for fields> 1.6 bar

Accuracy: ± 0.5 f.s.